Comac Cal Flow Switch FS
Product Description
Calorimetric flow switch Comaccal FS work on the principle of different cooling rates of a heating sensor immersed in a cross sectional profile, depending on the flow rate of the medium. Thus, if the submerged sensor cools down faster, it means that the flow of the medium is faster and vice versa, if the sensor cools down more slowly, the flow rate is lower.
The sensor is equipped with a microswitch for setting the switching / expansion point of the flow monitor. In this mode, the contact is closed or disconnected at the output according to the media speed in the pipeline. Additionally, the meter can be equipped with a 4-20mA current output to transmit the flow / flow rate (depending on the type).
Additional information
Additional Information
Comac Cal Flow Switch FS
Product Short Description
Calorimetric flow switch Comaccal FS work on the principle of different cooling rates of a heating sensor immersed in a cross sectional profile, depending on the flow rate of the medium. Thus, if the submerged sensor cools down faster, it means that the flow of the medium is faster and vice versa, if the sensor cools down more slowly, the flow rate is lower.
The sensor is equipped with a microswitch for setting the switching / expansion point of the flow monitor. In this mode, the contact is closed or disconnected at the output according to the media speed in the pipeline. Additionally, the meter can be equipped with a 4-20mA current output to transmit the flow / flow rate (depending on the type).
Additional Information
- Sensor lengths 65mm and 125mm
- Process connection G1/2″ G1/4″ NPT1/4 M14x1,5
- Clamp connections also available if sizes DN25 (50, 5 mm) & DN50 (64 mm)
- Adaptors available for smaller pipes DN2.7 DN4.5 DN10 DN 15 and DN20
- 4 Versions
- FS 10 – 1× status output (depending on flow velocity)
- FS 11 – 2× status output (depending on flow velocity)
- FS 15 – 2× status output (1× depending on flow velocity and 1× on temperature)
- FS 20 – 1× status output and 1× current output (depending on flow velocity)
Additional Information
- Sensor lengths 65mm and 125mm
- Process connection G1/2″ G1/4″ NPT1/4 M14x1,5
- Clamp connections also available if sizes DN25 (50, 5 mm) & DN50 (64 mm)
- Adaptors available for smaller pipes DN2.7 DN4.5 DN10 DN 15 and DN20
- 4 Versions
- FS 10 – 1× status output (depending on flow velocity)
- FS 11 – 2× status output (depending on flow velocity)
- FS 15 – 2× status output (1× depending on flow velocity and 1× on temperature)
- FS 20 – 1× status output and 1× current output (depending on flow velocity)
