Location

Dublin, Ireland

  1. Home
  2. Product
  3. DG 35300 S Trip Amp Currrents to 5A DC/AC 1 Relay Output

DG 35300 S Trip Amp Currrents to 5A DC/AC 1 Relay Output

Current Monitoring Relay DG 35300

Monitoring of DC and AC current signals

The configurable Current Monitoring Relay DG 35300 is used for limit monitoring and processing of DC and AC current signals and mV signals for current measuring with shunt resistors. A SPST relay or optionally an isolated, passive transistor switch (Open-Collector) is available at the output.


Additional Information

General Data

Switching errorDC: < 0.2 % full scale
AC: < 0.5 % full scale
Temperature coefficient< 100 ppm/K
Test voltage3 kV AC, 50 Hz, 1 Min., Input against output against
power supply/In-Rail-Connector
Working voltage 1)
(Basic Insulation)
600 V AC/DC for overvoltage category II and pollution
degree 2 acc. to EN 61010-1
Protection against electrical shock 1)Protective Separation by reinforced insulation acc. to
EN 61010-1 up to 300 V AC/DC for overvoltage
category II and contamination class 2 between input
and output and power supply.
Ambient temperatureOperation
Transport and storage
–25 °C to +70 °C  (-13 to +158 °F)
–40 °C to +85 °C  (-40 to +185 °F)
Power supply24 V DC,     16.8 V to 31.2 V DC, max. 1.0 W
EMC 2)EN 61326-1
Construction6.2 mm (0.244″) housing, protection class IP 20, mounting on 35 mm DIN rail acc. to EN 60715
ConnectionCaptive plus-minus clamp screws
Wire cross-section 0.5 to 2.5 mm2 / AWG 20-14
Stripped length 8 mm / 0.3 in
Screw terminal torque 0.6 Nm / 5 lbf in
WeightApprox. 70 g

Need Any Help?

Thank you for your interest in Manotherm. If you have any questions about our products please call us on 01-452-2355