DMB 96200 4 Channel AI Module
4 Fully Isolated Analog Inputs, Modbus RTU
The Modbus 4 Channel Al Module provides four fully isolated, independently configurable inputs. Each input can be configured as either a current input or a voltage input. Various filter functions can be used to suppress interferences.
All parameters can be set via the Modbus RTU interface and via a programming socket behind the front panel. A free PC configuration software also offers extended setting options and extensive diagnostic functions during operation. A subset of the most common settings is also available via DIP switches.
The 5 port isolation ensures reliable decoupling of the inputs from each other and from the processing circuit and the power supply. Power supply and Modbus RTU are connected via the rear-mounted In-Rail-Bus connection (see Accessories).
Additional Information
• Acquisition of 4 industrial standard signals individually configurable as current or voltage input
• 4 galvanic isolated inputs protection against erroneous measurements due to parasitic voltages or ground loops
• Protective 5 port separation up to 300 V AC/DC Test voltage 3 kV
• Fast signal acquisition high measuring rate, short processing times
• In-Rail-Bus connector for Modbus and Power Supply allows fast and economical installation
• Freely scalable up to 247 DRAGO Module in one Modbus segment
• Extremely slim design 6.2 mm slim housing for a simple and space saving DIN rail mounting
• 5 Years Warranty Defects occurring within 5 years from delivery date shall be remedied free of charge at our pla

Need Any Help?
Thank you for your interest in Manotherm. If you have any questions about our products please call us on 01-452-2355







