Location

Dublin, Ireland

  1. Home
  2. Product
  3. DZU 1461 and 1462 In Rail Mini Modbus

DZU 1461 and 1462 In Rail Mini Modbus

In-Rail-Mini Modbus

for installation of small Modbus applications with In-Rail Bus System

Cost-effective and fast solution for small In-Rail-Bus installations.

The In-Rail-Mini Modbus is used to put the supply voltage 24 V DC into the In-Rail-Bus connectors and to connect the Modbus lines A and B. Line E is available for group messages, e.g. for a group error message. DIP switches can be used to connect the usual terminating and polarization resistors for RS 485 interfaces.

The In-Rail-Minis are available for DIN rail heights of 7.5 mm and 15 mm (see order information).


Additional Information

General Data

Supply voltage24 V DC (working range 16.8 V … 32 V DC)
Input current= 1 A (Fuse recommendation 1.25 AT)
Modules amountMax. 7 DRAGO Modbus Modules DMB series
Network ModbusTerminating and polarisation resistors can be switched on via DIP switch
Group message EGroup message, Pull-up resistor can be switched on via DIP switch
Connection (captive clamp screws)0.08 … 1.5 mm² / AWG 28 … 18 with ferrule
Stripped length: 7 mm / 0.3 in
Screw terminal torque: 0.22 … 0.25 Nm / 0.15 … 2.2 lbf in
DimensionsDZU 1461: 35 x 7.5 mm DIN rail
DZU 1462: 35 x 15 mm DIN rail
Full length 75 mm, available module space 50 mm

Need Any Help?

Thank you for your interest in Manotherm. If you have any questions about our products please call us on 01-452-2355