Follow Us
Your pump is designed for use with thin viscosity
petroleum fuels such as gasoline blends (up to
15% such as E15), diesel fuel blends (up to 20%
such as B20) and kerosene. Additionally, “Pump Only”
models (sold without a hose and nozzle) are
compatible with aviation gasoline AVGAS 100LL and
kerosene grade Jet A. Using the pump with other
fuels can damage components and void the warranty.
Use of alcohol blends above 10% (E10) and
biodiesel blends above 5% (B5) have not been
reviewed by UL.
Model Components
PRO35-115AD: Includes pump, hose and
automatic diesel nozzle.
PRO35-115MD: Includes pump, hose and manual
dieselnozzle.
PRO35-115PO: Includes pump only.
PRO35-115RD:Includes dedicated pump only for
remotedispensing systems.
PRO35-115PO/XTS: Includes pump only and
components to assemble to unit before use.
NOTE: Suffixes MD, AD, PO and PO/XTS are for
ordering purposes only. Constructions described
above are covered as alternate constructions under
the Part No. PRO35 UL Listing.
Your pump is designed for use with thin viscosity
petroleum fuels such as gasoline blends (up to
15% such as E15), diesel fuel blends (up to 20%
such as B20) and kerosene. Additionally, “Pump Only”
models (sold without a hose and nozzle) are
compatible with aviation gasoline AVGAS 100LL and
kerosene grade Jet A. Using the pump with other
fuels can damage components and void the warranty.
Use of alcohol blends above 10% (E10) and
biodiesel blends above 5% (B5) have not been
reviewed by UL.
Model Components
PRO35-115AD: Includes pump, hose and
automatic diesel nozzle.
PRO35-115MD: Includes pump, hose and manual
dieselnozzle.
PRO35-115PO: Includes pump only.
PRO35-115RD:Includes dedicated pump only for
remotedispensing systems.
PRO35-115PO/XTS: Includes pump only and
components to assemble to unit before use.
NOTE: Suffixes MD, AD, PO and PO/XTS are for
ordering purposes only. Constructions described
above are covered as alternate constructions under
the Part No. PRO35 UL Listing.
The PRO35 series fuel pump is designed to safely
transfer low viscosity petroleum fuels such as gasoline
blends up to 15% (E15), diesel blends up to 20% (B20),
kerosene, AVGAS 100LL, and Jet A. The pump is
designed for permanent mounting on vented storage
tanks, either in-ground or above-ground.
RAINPROOF for outdoor use. Use of alcohol blends
above 10% (E10) and biodiesel blends above 5%
(B5) have not been reviewed by UL.
Performance
Pump Rate: Up to 35 GPM (132 LPM)
Duty Cycle: 30 minutes ON, 30 minutes OFF
Dry Prime: 15 ft. (4.6 m) maximum
Discharge Lift: 10 ft. (3 m) maximum
Operating Temperature
-20° F to +125° F (-29° C to +52° C)
XTS Operating Temperature
Extreme Temperature Series pumps are capable
of operation down to -40° F. Any pump operation
below -20° F has not been evaluated by UL.
Bypass Pressure
25 PSI
Electrical
Input: Factory set at 115 VAC, 60 Hz. Optional
to set at 230 VAC, 60 Hz.
Conduit: ½ in. FNPT
Current Draw: 9.8 amps at full load (at 115 VAC, 60
Hz)
Motor: ¾ HP, 1725 RPM induction type
provided with an internal auxiliary
temperature-limiting device
Mechanical Connections
Bung: 2 in. MNPT
Inlet: 1 ¼ in. FNPT
Outlet: 1 in. FNPT
Accessories
Hose: 1 in. NPT x 1 in. x 18 ft. (5.5m) Buna-N
electrically conductive
Nozzle: 1 in. NPT manual or 1 in. NPT automatic diesel
Security: Nozzle can be padlocked
Ship Weight PRO35-115PO 67.0 lbs (30.4 kg)
PRO35-115MD 78.0 lbs (35.4 kg)
PRO35-115AD 80.2 lbs (36.4 kg)
PRO35-115RD 65.1 lbs (29.5 kg)
The PRO35 series fuel pump is designed to safely
transfer low viscosity petroleum fuels such as gasoline
blends up to 15% (E15), diesel blends up to 20% (B20),
kerosene, AVGAS 100LL, and Jet A. The pump is
designed for permanent mounting on vented storage
tanks, either in-ground or above-ground.
RAINPROOF for outdoor use. Use of alcohol blends
above 10% (E10) and biodiesel blends above 5%
(B5) have not been reviewed by UL.
Performance
Pump Rate: Up to 35 GPM (132 LPM)
Duty Cycle: 30 minutes ON, 30 minutes OFF
Dry Prime: 15 ft. (4.6 m) maximum
Discharge Lift: 10 ft. (3 m) maximum
Operating Temperature
-20° F to +125° F (-29° C to +52° C)
XTS Operating Temperature
Extreme Temperature Series pumps are capable
of operation down to -40° F. Any pump operation
below -20° F has not been evaluated by UL.
Bypass Pressure
25 PSI
Electrical
Input: Factory set at 115 VAC, 60 Hz. Optional
to set at 230 VAC, 60 Hz.
Conduit: ½ in. FNPT
Current Draw: 9.8 amps at full load (at 115 VAC, 60
Hz)
Motor: ¾ HP, 1725 RPM induction type
provided with an internal auxiliary
temperature-limiting device
Mechanical Connections
Bung: 2 in. MNPT
Inlet: 1 ¼ in. FNPT
Outlet: 1 in. FNPT
Accessories
Hose: 1 in. NPT x 1 in. x 18 ft. (5.5m) Buna-N
electrically conductive
Nozzle: 1 in. NPT manual or 1 in. NPT automatic diesel
Security: Nozzle can be padlocked
Ship Weight PRO35-115PO 67.0 lbs (30.4 kg)
PRO35-115MD 78.0 lbs (35.4 kg)
PRO35-115AD 80.2 lbs (36.4 kg)
PRO35-115RD 65.1 lbs (29.5 kg)
Manotherm is actively involved in most industry sectors including pharmaceutical, food, water, power generation, chemical, semiconductor, mining, HVAC, oil, and gas.
PRL Register number 1319WB
Quick Links
CONTACT US
